I chose Manjaro KDE as one of the SteamVR requirements is KDE Plasma. It’s required because it has a DRM function to allow SteamVR to take ownership of the DisplayPort.
A quick google search says that PopOS is Gnome based. But KDE can be installed over it? I might give it a go.
Windows 10 LTSC FTW!!! I just installed it and wow is it snappier and devoid of nearly all of those annoyances. I have no idea if productivity apps are affected by its stripped down nature but for Steam gaming it’s perfect. I get less lag spikes on steamVR.
I haven’t trusted Windows in years. This is just for gaming. I have a physically separate hot swappable Optane SSDs for Linux and Windows Gaming.
For those who will winge at me for not just switching to Linux. During this process I gave a concerted effort to give Linux a go and chose Manjaro KDE to try for steamVR gaming. It sucked. Once I had worked out that it was a permissions issue (It’s always a fucking permissions issue under Linux) and just ran it under the root account, there was extremely high latency for the VR compositor to HMD display. Completely unusable as it made me sick and that’s usually very hard. I tried X11 and Wayland. Direct and Non Direct output modes. No success.
Isn’t the Banana Pi R64/R3/R4 close enough to that?
FYI the open source OpenWRT based Banana Pi R3 AX 4x4 is a thing. Don’t buy closed source Routers/APs on purpose.
Sound like another reason for the “free press” to get reforms about their accuracy reporting the “news”. I am typically against such restrictive legislation but if the news holds that much power, they need to see some regulation put in place.
Every time someone writes x.com I immediately think they’re talking about a porn site. What a shit rebrand. Or what a perfect name I guess?
My solution is RAIDZ5 and storing the backup on LTO6 tape with parity/erasure code. I think the fact that scrub times take 24 hours even on 16TB drives is already over the safety margin. If a drive failure happens, the first thing I’ll do to run a manual diff backup which should take a fraction of the time and then run the ZFS resilver.
I’m beginning to see why SSD RAID is being considered now. My guess for HDDs in enterprise is that a RAID 15 (I made this up) would be considered. What I mean is data is stored on two identical servers each running RAID5 or 6. Off the shelf solutions like Gluster exist and that seems to be gaining traction at least according to Linus Tech Tips.
I’m dying. 🤣
If your computer is incapable of even running Ubuntu. Then I don’t think it’s worth using.
Cool. So you can no longer turn your phone off.
You know what’s funny. I was investigating the hardware datasheets for the PinePhone and looking at the RTC module and just like PC RTC chips there is an option to trigger an interrupt/power on when a certain time is met. That means that there appears to be no reason this couldn’t be a current feature on probably all modern smartphones. Just lack of software support.
You would surprised how much control a fearmongering narcissist can have over you. And I’d argue, most christian conservative are narcissists.
Yeah. All the cool kids are doing it. Like Tom Cruise.
Well I’m in my mid 20’s so I’m hoping for at least that long :). No I won’t likely need alot of what I store to last that long although I am a member of r/DataHoarder (not sure if they’re on lemmy yet) but for a few items like family photos/videos it’s nice to have it written in a way that I can mostly just set and forget. With the standardization and open source implementation of LTFS you have even less worry about having the software to read it in the future. A SAS IT mode HBA and linux with a git clone of the LTFS repo is all you need.
In terms of cost the drive was very expensive ($2500 NOS from eBay US) but if you treat that as the one off entry cost, the tapes are cheaper for me to buy than the equivalent in HDDs here in Australia. That’s comparing ~$460 20tb EXOS HDDs from serverpartdeals.com to $43 x 8 = $344 2.5TB LTO-6 from stutchdata.com.au.
Also I store the tapes in IP67 boxes from bunnings along with a pack of desiccant and put the boxes in a cool but damp area. Don’t really have alot of choice where I live. It’s either that or hot daily temperature swings. Basement vs attic/garage.
I hope that’s enough to store them correctly environmentally speaking. I am in the process of working out how to clean family VHS tapes that were not stored correctly and that’s not an operation I want to revisit. An extended project is to make 900mhz button cell humidity/temperature monitors to notify me when desiccant has expired.
This may seem excessive but I would argue most don’t do enough in an age where more and more is being stored digitally as the only copy rather than print, etc. I feel this is a small price to pay to keep the still more compact and convenient all digital lifestyle without the data loss issues most people experience. The drive was expensive to buy into but with how little I use it I hope it’s going to last a long time.
There is one on the Wikipedia page.
https://en.wikipedia.org/wiki/DVD-RAM
Due to the caddy nature I believe there were plans or limited availability of double-sided disks. That would have made it so much more appealing I think.
Yea but the tape is likely to last the 20-30 year estimate. You couldn’t say the same about HDDs especially the helium sealed ones.
Whether the tape drive will survive as well is another question but between the simpler mechanism, a drive 2 generations ahead can still read the tape, parts inter-compatibility if you needed to frankenstein an older drive with new rollers and motors and just plain buying and keeping drives sealed in storage as new-old-stock ahead of time. You have a few options to choose from.
Where as with HDDs you may have to repair each one. The helium ones you may have to re-gas.
Tape sounds like a better long term archival/backup approach.
Believe it or not, first gen DVD-RAM came exactly like this. But manufacturers cheaped out / wanted the drives to be more easily compatible with CDs. So the caddys were scrapped.
And then unsolved as of late by manufacturers cheaping out.
It’s silly to be an absolute open source purist when it comes to Valve anyway. They arguably deserve the money for the amazing ecosystem they have compared to the competition and are one of the biggest contributors to getting GUI frameworks and other Linux systems developed for the Linux based steam deck.
Valve will likely be the party that gets VR working mainstream on Linux for the upcoming Valve Decard standalone headset. You want to talk about the power of open source… well… an affordable VR headset that’s at least mostly open source in the software department that is also good for gaming. Sign me up. It’ll be miles better than what Facebook shits out for it measly 3-4 years of support.
I have an OG Vive that I use as the multiplayer setup for when friends come over and it’s still fully supported. 8 years later.
Valve may not be completely committed to everything open source but until someone out shines them they are the best option for flexibility and longevity.
Also someone need to be paid to develop open source software. This being the beginning of the topic and all. I’m happy for that to be Valve at the moment as they have shown the industry how to be better.
No I don’t work for Valve, I’m just sick of closed restrictive platforms as well as open janky platforms for gaming and hardware with fixed EOL dates. I see Valve as the best balance/compromise.
Sorry for my brains wall of text mode.
Doesn’t Windows 10 already do that? I could never get the freaking thing to leave my files behind and disable itself.
Windows 10 LTSC for the win if you have software you can’t yet abandon.