I hate that! Especially when it was the correct version and then magically one day it is some other one. One time it played that awful pop version of Professional Widow by Tori Amos and that was very upsetting until I found the normal version that sounds awesome.

I saw that thumbnail of the table and immediately knew what channel it was.

The Casual Vacancy

I forced myself to finish it at the time, but I hated every single moment. They were all bad people and I had zero sympathy for any of the kids or adults, except for the one girl who died at the end. Obligatory Rowling can jump off a cliff too.

I didn’t finish the last couple books, but I did enjoy it fully knowing the subject matter was about Revelations. I mostly read it as a kid and re-read for a bit as an adult. I did not grow up in a religious household. There was a point though where the books went a little too off the rails, and I gave up.

It was the SCADA view right? A lot of SCADA software is basically running on top of windows, though you typically would never see the desktop. Ignition at least is cross platform, but that is because the server is Java and Jython. A big part of why things are running on windows is due to OPC, which was traditionally all DOM and .NET. It is basically a standard communications protocol and is what allows your HMI/SCADA to communicate with PLCs. Otherwise, you use proprietary drivers and native PLC specific protocols.

SCADA programming/design is kind of an art and is usually written by an either an overworked engineer or someone who had far too much time on their hands. You basically build screens using specialized software, hook up buttons and UI elements to PLC signals, and pass some signals from the UI to the PLC. They are all heading in the Edge/iot/cloud/web based/techno-babble direction these days…

Ignition, programming software is free!: https://inductiveautomation.com

Some other random ones I have seen or used in the past: https://www.siemens.com/global/en/products/automation/simatic-hmi/wincc-unified.html https://www.aveva.com/en/products/intouch-hmi/ https://www.rockwellautomation.com/en-us/products/software/factorytalk/operationsuite/view.html

Ok. Let’s do this! If you have a 4 cup pyrex/microwavable measuring cup, it is much easier.

• Sauce pan with a lid. Nonstick is fine.
• 2 cups of rice using dry measuring cup
• 3 cups of water
• Salt if using unsalted butter
• 2 tablespoons of butter

1. Put empty pan on stove and set heat to medium-high. If these are steel pans, stick to medium. Go towards high if nonstick as it takes a bit to heat up.
2. Put water and butter in microwavable cup and throw it in the microwave until it starts to simmer, maybe 3 minutes? Depends on microwave and dish.
3. While you are waiting on microwave, put dry rice in pan and gently stir/fold. They will start to turn white, but don’t let them burn. If you need to take the pan off and turn the heat down, do it. We are just preheating the rice and pan up. Add salt if needed.
4. Get ready. As soon as that water is hot enough to boil or close to, take it out, pour it in the pan. It will be violent.
5. Do a quick stir, throw the lid on, and turn the heat down to the lowest setting. The water should fully cover the rice.
6. Walk away. The bottom might toast a little, but that is fine as long as it doesn’t full on burn.

After 20 minutes or so, you can do a real quick check and if it looks kind of wet, throw the lid back on and wait.

At this point, you should have perfectly acceptable rice. Take the lid off, stir the rice with a more folding motion to let it steam any additional moisture out.

I assure you, you get icy roads and snow at 28-30f. Upstate NY gets tons of snow and most of that is above 25f. I don’t see it get in the teens too much. Single digits or colder is pretty rare. All depends on the region up here. Due to the lakes, it is all over the place.

I think the highest speed limit I have seen in America is 85mph, which is around 135km/h. Typical highway speed limits though are 65mph, but everyone goes 5-10 over (105-120km/h).

The nice thing about mph is the whole mile a minute at 60mph. Makes it easy to mentally estimate time of arrival.

🎶Little Mary Sunshine🎶

I love this movie. Reefer Madness.

deleted by creator

I think everyone has explained the how and why, but not any real solutions that don’t involve using a completely different application. I don’t have an iPhone in front of me, but with Android you can share as a link to Google Photos instead of sending the picture/video directly. I am pretty sure you can do something similar with iCloud. Have her try the share as iCloud link instead.

Update: I just tested it. I had them open up Photos, go to the image/video, tap the share button, and then if you scroll down a tiny bit there is a share as iCloud link. I was able to view it just fine on my Android phone.

We used these in university to store weed. Bio kids were awesome and passed them out.

The arrogance of Kent is ridiculous and he sounds like a man-child throwing a neck beard flavored tantrum whenever someone questions the bullshit reality that doesn’t actually exist. This isn’t some dumb application you can run into the ground because you can’t play well with others. This is the fucking linux kernel, and if you can’t fathom how bad it is to throw random “fixes” at the last minute instead of waiting for the next development cycle, you are the problem. I see that shit all the damn time in corporate environments and I am sick of arrogant programmers who can’t understand processes, why they exist, and why they need to be followed.

I had a friend do this. It was utter misery for over a year. Most of his teeth were shattered, so he had to wait for a lot of fragments to expel naturally.

Do not discount pain management that involves opioids. Not saying to use them for weeks nor do I know your personality for bad habits, but if it gets bad please don’t suffer for no reason. Getting ibuprofen or acetaminophen with low dose codine may be a good middle ground and is even available over the counter in some countries. Extended pain is mentally exhausting and isn’t worth the hit on your mental health.

f you are struggling taking pills, get liquid ibuprofen. Sometimes you can get a chemist to make a suspension for you, otherwise get childrens. I do that if my throat gets too infected and I am unable to swallow. Honestly, it works far better than the pills and I needed a lot less.

Best thing is to be honest with your doctors, even if you do not want anything stronger. Be sure to communicate any discomfort due to ill fitting dentures. Ask questions if anything unexpected comes up. My friend’s doctor was super shitty and didn’t even tell him about all of the left over fragments that still had to come out on their own.

Yeah, I have Russia and a few other countries blocked on my network. That is a no-go for me personally.

No idea about which specific type of business it is, but keeping that history long term can have some benefits, especially to outside people. Some government agencies require companies to keep records for a certain number of years. It could also help out in legal investigations many years in the future and show any auditors you keep good records. From a historical perspective, it can be matched to census, birth, and death certificates. A lot of generational history gets lost.

Companies also just hoard data. Never know what will be useful later. shrug

I am really trying to follow this, but I need more coffee I think. I am happy to be educated if it can be explained a little easier or some good reference material.

https://en.m.wikipedia.org/wiki/Saul_Kripke

https://en.m.wikipedia.org/wiki/Topos

Me too! I have used it for a couple other non-rpi devices in the past as well. It is super simple and works on my Mac. I haven’t even looked at other utilities in years.

Holy shit Rockbox was amazing. I might still be subscribed to the mailing list. I used that on a few different MP3 players as a kid. I had no idea. Fuck I am old.

Edit: For a list of what he has worked on - https://daniel.haxx.se/opensource.html

UL certification can mean different things, depending on the product and type of mark. It also isn’t that expensive to get UL listed as it isn’t like every single item you produce is tested. Each product you design is tested, but not each item you produce.

There are 3/4 types. UL listed, UL recognized, and UL classified. Certified is newer and more stringent.

• Recognized is mostly for machinery and components within machinery. It isn’t terribly difficult to get, but annoying. I have dealt with this type as we design and build electrical panels. Usually you hand the design to a panel builder and they will get it certified before delivery.
• Listed is for products and appliances, and is fully tested for safety. This applies to most consumer electronics.
• Certified Enhanced is also for products, and you can read up on it here: https://www.ul.com/news/qa-uls-enhanced-certification-mark
• Classified is for products and is half ass tested. All it means is that some requirements for UL were tested and passed, but not all.

If a product is Classified by UL, this can mean its testing meets the particular requirements for a single test with a published result, but has nothing to do with all the other tests that may form part of a Standard (i.e., UL 181).

As for pricing for UL listed, it can be just a few grand for a single product. Not much when you are selling thousands. I am sure Classified is even cheaper. I wonder how many of these cheap ass lamps say Classified.